Single Cylinder Hydraulic Cone Crusher (crushing machine)

1 same design as Nordberg 2 for fine crushing 3 with copper and steel eccentric set 4 size adjustable 5 four strokes

1. Instrucion

Single Cylinder Hydraulic Cone Crusher (crushing machine) is in the digestion and adsorption of advanced crushing technology in the world today, on the basis of optimal design of perfectly combining the swing frequency, eccentricity and crushing cavity type. It makes the finished product material level higher. The material level which less than the tight side discharging opening is more than 80%. So it can improve the processing capacity of producing line subsequent handling, and reduce the comprehensive energy consumption.

2. Advantages

Disadvantage of traditional spring cone crusher

1. The main spindle adopts the single supporting structure, with smaller bearing crushing force, with larger eccentric angle, with worse stability. The adjusting structure of protect device and discharging port are too complicated, with too many out-hanging parts.

2. The crushing cavity type, swing speed, and eccentricity are without being optimized. It cannot realize the laminating crushing, so the processing capacity is very low, the electric consumption of per Ton is very high, the shape of finishing product is not good.3. It has to be turn off if you want to adjust the discharging port, and it cause a large drain of man power and material resources. The adjusting process is very complicated and cumbersome. 4. The machine has to be turned off for a long time to change the liner, it wastes time and energy. And the liner faying surface has to be casted with fillers.

5. The spring protect function cannot realize the quantitative control. The shaking is very strong when reset, the machine is easily been destroyed.

6. The water supply pipe and drain pipe of water sealed dust system can be easily jammed. And the water and oil are easily been mixed together.

Advantage of TS300 series single cylinder hydraulic cone crusher

1. It adopts the optimal design of perfectly combining the swing frequency, eccentricity and crushing cavity type. It makes the finished product material level higher. It reduces down the comprehensive energy consumption more than 30%.

2. The crushing cavity type is optimal designed, and perfectly combined with swing frequency and eccentricity. It ensures the laminated crushing between the materials. It improves the machine processing capacity greatly, 30%-50% higher than the traditional spring cone crusher. And the product grain shapes is very good, the most is the cube structure, the quantity of needle-flake type material is reduced down greatly.3. The main spindle adopts the double-supporting structure, can bear larger crushing force, the dynamic cone with small eccentric angle, with better stability.

4. It can change the stroke according to the material properties. You can get the different eccentricity by rotating the eccentric sleeve to be fit for different crushing request. And it makes the product curve and productivity optimal.

5. It adopts the hydraulic control system, adjust the discharging opening conveniently, you can adjust the opening on line. And it provides the overload protection. It is easy to realize the automation, the reliability and life are improved greatly.

6. The dilute oil station adopts electric refrigeration, quickly and good effect. It avoids restricts, such like slow of wind refrigeration, the shortage of water refrigeration.

7. It adopts the positive pressure dustproof system and unique seal structure design, can keep the cleanness of lubrication oil and prolong the service life of components.

3. TS300Z Single Cylinder Hydraulic Cone Crusher (crushing machine) main technical parameters:

Model	Cavity type	Cone bigger end diameter MM	Feeding port MM	Max. feeding particle size MM	Discharging port adjust range MM	Processing capacity T/H	Horizantal axis speed rpm	Motor power kw	Main frame weight kg	Dimention mm
TS300Z	EC	1160	380	320	32-50	320-550	980	250	16500	2350×1860×
TS300Z	C	1160	280	240	25-44	280-480	980	250	16500	2650

Notice: the above data processing is based is basd on the density of bard 1.6T/M3 dry granite, since the feed particle size, rock type and moisture content and other factors not the same, actual results will vary, discharge port data is obtained when the situation 25mm eccentricity, and with materials related to that discharge opening is variable. Capacity and other parameters is not greater than the material compressive strength of 250mpa, less than 4% water, feeding evenly, too much size and too small particle size not greater than 10%, electricity motivation load at the rated load reached 80%-90% of the data subject to change without notice.

4. TS300Z schematic structure

5. Cone crusher eccentric set of components

6. Spindle dynamic cone component

7. Transmission shaft component

8. dilute oil station

Single Cylinder Hydraulic Cone Crusher (crushing machine)

Verified Information This information is Verified by Bureau Veritas and is valid for the following period: 2012/06/25 --- 2013/06/25 All the information below may covers both Gold Supplier and its related companies , Their Relationship will be affirmed according to china laws and regulations , also it will be clearly display in the full report >> Production Capacity: Product line name Production Line Capacity Actual Units Produced(Previous Year)

Materials Testing Machine, Pressure Testing Machine, Soil Testing Machine, Cement Concrete, Bitumen Testing Machine	910 Sets/Month	6300 Sets

Export Market Distribution: Market Revenue(Previous Year) Total Revenue (%)

Southeast Asia	confidential	0.2
Africa	confidential	0.2
Mid East	confidential	0.2
Southern Europe	confidential	0.2
South Asia	confidential	0.2
Domestic Market	confidential	99.0

Production Machinery: Machine Name Brand & Model No. Quantity Number of Year(s) Used Condition

Cylindrical Grinding Machine	MQ1350B	3	8.0	Acceptable
Shaper	BO0101A	3	8.0	Acceptable
Protection Welding Machine	NBV-500	10	4.0	Acceptable
Plasma Welding Machine	LGK8-63	1	4.0	Acceptable
NC Hydraulic Guillotine Shears	QC-12Y	4	2.0	Acceptable
Bending Machine	Wanghua	2	4.0	Acceptable
Punching Machine	16T, 40T	2	4.0	Acceptable
Sawing Machine	DS60	4	2.0	Acceptable
CNC Lathe	GSK-980TDA-V	2	4.0	Acceptable
Longmen Milling Machine	TX-L	2	8.0	Acceptable
Vertical Milling Machine	No Information	3	8.0	Acceptable
Universal Milling Machine	X6332	2	8.0	Acceptable
Flat Grinding Machine	M7140	2	8.0	Acceptable
Surface Grinding Machine	6035	1	8.0	Acceptable

Testing Machinery: Machine Name Brand & Model No. Quantity Number of Year(s) Used Condition

Centrifuge	80-1	1	2.0	Good
Micro Element Analyzer	TP-BS3A	1	2.0	Good
Infrared Carbon and Sulfur Analyzer	TP-CS2C	1	3.0	Good
Electric Arc Furnace	TP-DRL	1	1.0	Good
Constant Temperature Drying Box	Shanghai	1	2.0	Good
Rockwell Hardness Tester	HR-150A	2	2.0	Good
Precision Digital Measuring Instrument	DS60	3	3.0	Good
Vernier Calipers	0-150mm, 0-200mm, 0-300mm, 0-500mm, 0-1000mm	15	3.0	Good
Micrometer	0-25mm, 25-50mm, 50-75mm, 75-100mm ,100-125mm, 125-150mm, 150-175mm, 175-200mm, 200-225mm, 225-250mm, 250-275mm, 275-300mm	20	3.0	Good

Production Flow: 1.Blanking 2.Metal Processing 1 3.Metal Processing 2 4.Metal Processing 3 5.Metal Processing 4 6.Sheet Metal Processing 1 7.Sheet Metal Processing 2 8.Painting 9.Assembly 10.Testing 11.Packing Certification: Certified Picture Certification Name Certified By Certificate No. Product Name & Model No. Available Date-Expired Date

	Executive Standard Registration Certificate	Shangyu Quality and Technical Supervision Bureau	330682BZ-1549-13	Hydraulic Materials Testing Machine	2011/11/10 --- 2016/11/10
	Executive Standard Registration Certificate	Shangyu Quality and Technical Supervision Bureau	330682BZ-1549-12	Electro-hydraulic Servo Materials Testing Machine	2011/11/10 --- 2016/11/10
	Executive Standard Registration Certificate	Shangyu Quality and Technical Supervision Bureau	330682BZ-1549-5	Electro-hydraulic Servo Rubber Bearing Shear Pressure Testing Machine	2009/12/25 --- 2012/12/25
	Executive Standard Registration Certificate	Shangyu Quality and Technical Supervision Bureau	330682BZ-1549-1	Digital Pressure Testing Machine	2010/02/20 --- 2013/02/20
	Executive Standard Registration Certificate	Shangyu Quality and Technical Supervision Bureau	330682BZ-1549-6	Power Cone Penetrometer	2009/12/25 --- 2012/12/25
	Executive Standard Registration Certificate	Shangyu Quality and Technical Supervision Bureau	330682BZ-1549-7	Asphalt Mixture Marshall Compaction Instrument	2009/12/25 --- 2012/12/25
	Executive Standard Registration Certificate	Shangyu Quality and Technical Supervision Bureau	330682BZ-1549-11	SY-1.5/2.0 Automatic Constant Temperature Double Digital Display Asphalt Ductility Instrument	2010/02/20 --- 2013/02/20